BRAND | Gefa |
Product | AT 200F - DN 500 (SD2263GA6500Y) |
Description | Pneumatically. pushers |
Internal code | IMP4274943 |
Technical specification | AT 200F - DN 500 domino solids sliders PN10 - PS1TS -10°C/+120°C Plate slider, flange version can be used as an intermediate flange and end valve. Solids, compact cross-seals. Conical panel milling before the Cross seals, interrupted in the middle. Side panel guide alternately interrupted in the front and rear housing. Dense termination in both flow directions. Flange: PN 10, Overall length: DIN EN 558 Series 20, Housing: DIN EN 1092-1 EN-GJL-250 (GG 25), narrowed in the passage Flow direction marked on both sides Colour: RAL 9005, electrically conductive Plate: 1.4301, segment radius (45 degrees beveled) milled wipeed edges 1. Cross Seal: PTFE/Silicone, 2nd Cross Seal: NBR Round cord: ceramic fibre, screws: galvanised steel. max. operating pressure: 1 bar Cylinder pneumatic BPSD2S3500A double-acting, without cushioning Diameter: 300 mm, control pressure: 6 bar Housing: Alu, Piston Rod: 1.4104 Structure: Columns, steel coated |
Please Contact Us to Order to offer competitive prices and delivery time for Gefa - AT 200F - DN 500 (SD2263GA6500Y) Pneumatically. pushers number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Germany Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Our company is not an authorized distributor. All rights are reserved by the manufacturers and their official partners.
saddle rings to disc flap series
saddle rings to disc flap series
saddle rings to disc flap series
K19SE DN 400 Seal Kit DN 400
KG92266E DN 125 (KG966BGH125Y)
Manually operated process flap
actuator
knife valve
sealing kit
sealing kit
seals
seals
seals
Gasket set
Manually operated ball valve
WARMGEAR/MANUAL VALVE ACTUATOR
Manually operated ball valve
Pneum. actuated process flap
Pneumatically. pushers