| BRAND | Cashco |
| Product | 1000HP-1+6+12 |
| Internal code | IMP4806436 |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Cashco - 1000HP-1+6+12 number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Germany Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Industriedruckregler
Requirements Specification: as requested Process data: Media: n.d. P1 (= set for overpressure): psig adjusting 4-6 / 270 to 410 mbar P2 (= Set n is vacuum): 70-150psig / 4.8 to 10.3 barg In the case of order: specify adjustment weight and setting for the opening pressure, as well as the material for the diaphragm seal Flow: n.d. Process Connection: DN80, flange according to EN 1092-1, form B1, PN16 Weight: 29 kg Size: (W) is about 405 x 490 x 250 mm
Ersetzt 46E-3A17-05030090D Nur in Verbindung mit 764P (Pos. 1) Anforderungsspezifikation: wie angefragt Prozessdaten: Medium: n.d. P1: n.d. Flow: n.d. Prozess-Anschluss: ANSI-Flansch 2“, 150 lbs, RF Gewicht: ca. 19 kg Größe: (BxHxT) ca. 255 x 190 x 165 mm PNEUMATIC CONTROL VALVE MODEL 2296, (you must order 764P to order this code – also note the higher bench range)- 46E-310S-0B500090E = PNEUMATIC CONTROL VALVE MODEL 2296, DN50 SIZE, SST BODY/BONNET,; 150# FLANGED OPT-30 CONNECTION; S1 TRIM, FULL PORT, = % CHARACTERISTIC; STANDARD CONSTRUCTION; MODEL C27 ACTUATOR, ATO-FC, 1.0-4.2 BARG BENCH SET; 764P DIRECT ACTING CONTROLLER W/AIRSET AND MOUNTING BRACKETS; NO POSITIONER; OPT-3 HANDWHEEL ASSEMBLY; STANDARD COMMERCIAL CLEANING & PAINTING;
Requirements Specification: as requested Process data: Media: n.d. P1: n.d. Flow: n.d. Process Connection: ANSI flange 2 ", 150 lbs, RF Weight: 19 kg Size: (WxHxD) approx 255 x 190 x 165 mm PNEUMATIC CONTROL VALVE MODEL 2296, DN50 SIZE, SST BODY / BONNET ,; 150 # FLANGED OPT-30 CONNECTION; MODEL C27 ACTUATOR, 0:34 to 1:03 BARG BENCH RANGE, REVERSE ACTION ATO-FC,% = CHARACTERISTIC, FULL PORT, S1 TRIM; NO POSITIONER; NO ENCLOSURE RATING; NO HAND WHEEL ASSEMBLY; STANDARD COMMERCIAL CLEANING & PAINTING;
non-oxygen, Aramid/SBR-B 1/4" (8) 2 B3 B4 20-80 (1.3-5.5) 2 B
Requirements Specification: as requested Process data: Media: n.d. P1: n.d. P2 (= signal output): 3-15psig / 0,2-1,03barg Flow: n.d. Process connection: NPT, 1/4 ", female thread Weight: 2.5 kg Size: (WxHxD) 125 x 125 x 105 mm MODEL "764P" PNEUMATIC CONTROLLER PRESSURE BARG 0:21 to 1:03 OUTPUT CONTROL BRONZE HOUSING (PNEU CIRCUIT) DN6 NPT PNEUMATIC CONNECTION ;; SST WETTED CONSTRUCTION; 316SST UPPER CASING & DIAPHRAGM, ductile iron LOWER CASING; 00:07 TO 2:07 BARG PRESSURE RANGE; DN8 NPT PROCESS CONNECTION @ CENTER OF UPPER CASING DIAPH ;; 5200P AIRSET, 0-2.07 BARG; STANDARD / COMMERCIAL CLEANING & PAINTING;
Druckmittler in Industriequalität
CASHCO - Industrial pressure regulator PNEUMATIC CONTROL VALVE MODEL 2296, SIZE DN25, GT BODY / BONNET ,; NPT SCREWED CONNECTION; MODEL C27 ACTUATOR, 0:34 to 1:03 BARG BENCH RANGE, REVERSE ACTION ATO-FC, LINEAR CHARACTERISTIC, FULL PORT, S1 TRIM; NO POSITIONER; NO ENCLOSURE RATING; NO HAND WHEEL ASSEMBLY; STANDARD COMMERCIAL CLEANING & PAINTING; Requirements Specification: as requested Process data: undefined Process connection: NPT fem. Weight: 12 kg Size: 230 x 230 x 340 mm
PRESSURE REDUCING VALVES, PRESSURE DESIGNATION:400 PSIG
oxygen trace analyzer,100-1000PPM,programmable two alarming point,4-20mA output,W/RS232,220V+/-10%, 50-60HZ
Anforderungsspezifikation: wie angefragt Prozessdaten: Medium: n.d. P1: n.d. P2 (=Set): 3-14psig/0,2-0,96 barg Flow: n.d. Prozess-Anschluss: ANSI-Flansch 1“, 150 lbs, RF Gewicht: ca. 10,5 kg Größe: (BxHxT) ca. 245 x 410 x 245 mm (must specify inlet supply pressure, set point, and dip tube length with order) P1WSSNA5VHSB000000 = DN25 SIZE MODEL 1078 PILOT OPERATED VACU-GARD VERTICAL OUTLET POSITION, INTEGRAL DIP-TUBE; PED COMPLIANCE REFER TO DIRECTIVE 97/23/EC.; 316 SST BODY, TRIM, SST DIAPHRAGM CASES WITH SST FITTINGS AND TUBING; SUPPLY PRESSURE GAUGE 0 - 6.9 BARG, TANK GAUGE 0 - 350 MBAR; DN25 150# RF FLANGES ATTACHED WITH NIPPLES; 50% FLOW PLUG; FLUOROCARBON ELASTOMER (FKM) SOFT SEATS & SEALS; 0.2 - .96 BARG RANGE SPRING; SST EXTERNAL PILOT FILTER;
RANGER ROTARY CONTROL VALVE
CASHCO – Industriedruckregler Modell „D-57“, Chlorine Service
Pressure test
DIFFERENTIAL PRESSURE REDUCING REGULAT
industrial control valve
Valve Diaphragm
Valve Diaphragm
CONTROLLER:PRESSURE