BRAND | ARI |
Product | 100283505-016 |
Internal code | IMP4519589 |
Technical specification | Figure 23.470 DN 25 ARI-STEVI 470/422 Straight-through control valve with flanges and stem-guided cone EN-JS1049 DN 25 Nominal pressure: PN 16 Flange drilling: according to DIN PN16 Cone design: parabolic cone+PTFE soft seal. up to max. 200°C Kvs value: 10 Characteristic curve: equal percent Spindle sealing: roof sleeves/PTFE graphite Final acceptance test: APZ EN10204 3.1 Acceptance material testing: APZ EN10204 3.1 Drive: DP32 Supplementary product description: * DVGW-tyg-tested according to EN 13611 Additional test requirement: DIN 12266-1, leak rate A Nitrogen test medium however, 10 bar Effectively (b.pneum.antr): Spring closes in case of air failure feathery. (bar) /stroke (mm): 0.80-2.40 stroke 20 mm Erford. Setting pressure (bar): 2.7 bar max. admissible Setting pressure (bar): 6 max. closing pressure (bar): 16 Distance column length: L1=188 mm Distance column spacing: 100 mm Coupling: M10 thread Positioner: EPS 33 Input signal: 4 - 20mA 2-wire Adjusted: 4 mA valve closed Inlet with ventilation air (bar): 6 bar |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for ARI - 100283505-016 number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Germany Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
actuator
normal safety valve
Safety Valve
Straight ANSI control valve with flanges and bellows seal and shaft-guided cone
Safety Valve
YBK RELIEF VALVE
ABK RELIEF VALVE
3-way control valve with flanges and bellows seal
ARI-PREMIO electric thrust actuator
Rolling diaphragm
set of springs
guiding band
o-ring
actuator
shut-off valve
thrust drive
Servo motor
Floating steam trap with membrane capsule for start-up venting
board carrier
board carrier
3-waz valve actuator