| BRAND | Carlo Gavazzi |
| Product | CTD9V16005AXXX |
| Description | AC Solid-core Current Transformer |
| Internal code | IMP242015 |
| Weight | 1 |
| Technical specification | AC Solid-core Current Transformer Type CTD-9V / CTD-9H (max 35x125mm) • Bus-bar type solid-core current transformer • Class 0.5 accuracy • Currents from 400 A to 3200 A • Up to 10 Bus-bar isolated fixing screws • Double screw terminals (up to 8-wire connections) • Sealable terminal block covers Product Description Ordering Key CTD-9V2000 5AXXX Solid-core current transformer with bus-bar mountng facility. Rated primary currents from 400 A to 3200 A. Model Primary current Secondary current Option Type Selection Model CTD-9V:vertical mounting CTD-9H:horizontal mounting Primary current From 400A to 3200A (Refer to the Range Table) Secondary current 1A (on request) 5A Option XXX:none XTX: tropicalization InputSpecifications Operating frequency48 to 62 Hz Max. system voltage0.72 kV Rated insulation level3 kV/1 min. @ 50 Hz Insulation class E (max 75°C) Short-time current rating Ith Typical 100 In /1 s Idyn 2.5 Ith The short-timethermal current Ith is anyway limited by the cable/bus-bar size Extended current rating refer to the Range Table Security factor (FS)≤ 5 (Class: 0.5, 1 and 3) General Specifications Standards According to EN60044-1 HousingABS, self-extinguishing: UL 94 V-0 MountingBus-bar mounting Standard accessoriesTwo terminal block screws. Ten bus-bar fixing screws. Ten plastic caps for bus-bar fixing screws. Two sealable terminal block covers. Special features1 A secondary current, Tropicalization Working temperature-25°C to: refer to the Range Table (-13°F to: refer to the Range Table) (R.H. < 90% non condensing @ 40°C) Storage temperature-30°C to +70°C (-22°F to 158°F) (R.H. < 90% non condensing @ 40°C) Approvals CE. cURus and CSA (400A to 2000A) Connection Screw type Cable cross section areaFrom 1.5 to 6 mm2 Min/Max screws tightening torque relevant to terminal block screws: From 1 to 2 Nm Max screws tightening torque relevant to the cable/bus-bar fixing screws: 0,3 Nm Protection degree IP00 (without sealable terminal covers) IP20 (with sealable terminal block covers + wire terminals) Bus-bar size Max. 35x125 mm WeightFrom 450 to 700 g |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Carlo Gavazzi - CTD9V16005AXXX AC Solid-core Current Transformer number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Germany Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
3-PHASE ENERGY METER +3 CURRENT SENSORS 90A REV.2
2PH COMP.S/START 220-400V 50A 110-400V I/P+RLY
2PH S/START 220-600V 37A 100-240V I/P+RLY
UPROX DR TI PL M30 2XNPN, PLG
UPROX DR TI PL M30 2XNPN, CAB
UPROX DR TI PL M30 2XPNP, PLG
UPROX DR TI PL M30 2XPNP, CAB
3PH PUMP START 220-400V 32A 110-400V I/P+O/L
3PH PUMP START 220-400V 32A 24VAC/DC I/P+O/L
AC DRIVE 400V 3PH 2.2KW SIZE2 F
2PH S/START 220-400V 45A 110-400V I/P
2PH S/START 220-400V 45A 24V I/P
3-PHASE ENERGY METER +3 CURRENT SENSORS 250A REV.2
2PH S/START 220-400V 45A 110-400V I/P+RLY
PHOTO AMP 6CH STD NPN NC
PHOTO AMP 6CH STD NPN NO
PHOTO AMP 6CH STD PNP NC
2PH S/START 220-600V 45A 100-240V I/P+RLY
2PH S/START 220-400V 45A 24V I/P+RLY
UPROX DR TI PL M30 4-20MA+NPN, PLG
UPROX DR TI PL M30 4-20MA+NPN, CAB
UPROX DR TI PL M30 0-10V+NPN, PLG
UPROX DR TI PL M30 0-10V+NPN, CAB
UPROX DR TI PL M30 4-20MA+PNP, PLG
UPROX DR TI PL M30 4-20MA+PNP, CAB
UPROX DR TI PL M30 0-10V+PNP, PLG
UPROX DR TI PL M30 0-10V+PNP, CAB
3PH PUMP START 220-400V 37A 110-400V I/P
3PH PUMP START 220-400V 37A 24VAC/DC I/P
SAFETY LIGHT CURTAIN 30MM RES AUTO RESTART 150MM H