| BRAND | Hbm |
| Product | K-WTX110-A-DC/-TA-ETH-AO-NO/-AA |
| Description | WTX110 weighing terminal |
| Internal code | IMP4947619 |
| Technical specification | Load cell connection: Analog load cells power supply: 24VDC Housing version: Table housing or wall-mounting Communication interfaces: Ethernet TCP/IP e.g for PanelX Analog or digital moduls: 1 x analog output Legal for trade data storage: No Firmware: Standard HBM |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Hbm - K-WTX110-A-DC/-TA-ETH-AO-NO/-AA WTX110 weighing terminal number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Germany Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Caseclip
Aufnehmer-Anschlusskabel
connection cable
Ethernet Cross-Over Cable Long 2m
Fire-Wire connection cable
3m long connecting cable for pressure sensor P3MBP
Electronic stabilizer for system GMAIL
TECHNICAL özllkl have information Forcing
DC measuring amplifier
MGCplus data acquisition system for the single-channel DC amplifier module Accuracy class 0.03
TF measuring amplifier for transducers
TF measurement amplifier
Process controller to monitor manufacturing processes with powerful evaluation criteria and memory function, 2-channel carrier frequency amplifier 4.8 kHz, for DMSund Inductive transducers, +/- 10V signals, incremental and SSI sensors, TEDS - sensor detection, Accuracy 0.1, filter 0,05-1000Hz, Ethernet interface, CAN interface, 5 control inputs, control outputs 8,
Complete process controller for the monitoring of fitting tasks with powerful evaluation criteria and storage functions, 2-channel 4.8kHz carrier frequency measuring amplifier for SG and inductive transducers, +/- 10V signals, incremental encoders and SSI transducers, TEDS - Sensor identification, 0.1 accuracy, 0.05-1000Hz filters, ETHERNET interface, CAN interface, 5 control inputs, 8 control outputs, Rail mounting per DIN EN 50022, IP20 protection, 18-30 V DC supply voltage, Convenient control using FASTpressSuite setup and analysis software: PME Assistant(full version), EASYteach (demo version) And INDUSTRYmonitor (demo version) delivered free of charge on CDROM, incl. documentation, drivers and help
Universalmessverstärker
AC-DC Power Supply
PRESSURE SENSOR
pressure sensor
absolute pressure sensor
Absolute Pressure
Plattformwägezelle
4.8 kHz carrier frequency, for strain gauge transducer, inductive, piezoresistive and potentiometric transducers - 10-digit alphanumeric LCD display backlit ± 199,999 - in an ergonomically favorable desktop case with handle / tilt stand - Output ± 10 V, ± 20 mA or 4.20 mA - accuracy class 0.1 - digital filter of 0.05 to 1000 Hz - 4 adjustable limit values - 2 peak memory - 8 parameter memory - Analog output via BNC connector - serial RS-232-C to Settings and data for output of measured values - Power supply 230 V (115 V switchable) 48 - 60 Hz - incl. RS232 and power cord
platform load cell
Single platform load cell
connector kit
HBM Schraubmesswelle, nominal torque 10 Nm with strain gauge measuring system, accuracy class 0.1 built-in rotary encoder Tool Standard connections 10 F / G 10 according to DIN 3121 with 2 fixed mounted connection cables separately for torque u. angle of rotation 3 m long, with free ends
Torque transducer, rated torque 20 NmMesssignalübertragung about SchleifringeDMS measurement system accuracy: 0.1Elektrischer connection via plug introduction of torque on shaft stub (friction) torque output signal 2mV / VNenndrehzahl 4000U / min
Torque reference sensor