| BRAND | Hioki |
| Product | PW3360-11 |
| Description | CLAMP ON POWER LOGGER |
| Internal code | IMP796522 |
| Weight | 1 |
| Technical specification | Measurement line & number of circuits 50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels Measurement items Voltage RMS, current RMS, voltage fundamental wave value, current fundamental wave value, voltage fundamental wave phase angle, current fundamental wave phase angle, frequency (U1), voltage waveform peak (absolute value), current waveform peak (absolute value), active power, reactive power (with lag/lead display), apparent power, power factor (with lag/lead display) or displacement power factor (with lag/lead display), active energy (consumption, regeneration), reactive energy (lag, lead), energy cost display, active power demand quantity (consumption, regeneration), reactive power demand quantity (lag, lead), active power demand value (consumption, regeneration), reactive power demand value (lag, lead), power factor demand, pulse input [PW3360-21 only]: Harmonic voltage level, harmonic current level, harmonic power level, content percentage, phase angle, total harmonic distortion (THD-F or THD-R), up to 40th order Voltage ranges 600 V AC (Effective measurement range: 90.00 V to 780.00 V) Current ranges 500.00 mA to 5.0000 kA AC (depends on current sensor in use), 50.000 mA to 5.0000 A AC (Leak clamp on sensor only) Power ranges 300.00 W to 9.0000 MW (depends on voltage/current combination and measured line type) Basic accuracy Voltage : ±0.3% rdg. ±0.1% f.s Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy Active power : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy (at power factor = 1) Display update rate 0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication) Save destination SD memory card, or internal memory at real time Data save interval 1 sec to 30 sec, 1 minute to 60 minutes, 14 selections Save items Measurement value save: Average only / Average, Max./Min. value, [PW3360-21 only]: Harmonic data save: Average only / average, max./min. value in binary format, Screen copy: BMP form (saved every 5 min. at minimum interval time), Waveform save: Binary waveform data Interfaces SD/SDHC memory card LAN 100BASE-TX: HTTP server function USB 2.0: When connected to a PC, the SD Card and internal memory are recognized as removable storage devices, remote settings via communication program, data download Pulse output: proportional to active power consumption when measuring integral power consumption, Isolated open-collector signal Functions Connection check, Quick Set navigation guide, clock, pulse input Power supply AC Adapter Z1006: (100 to 240 V AC, 50/60 Hz), 40 VA (including AC adapter) Battery Pack 9459: (DC 7.2 V, 3 VA, charging time 6 hr 10 m), 8 hours of continuous use (with back light off) Dimensions and mass 180 mm (7.09 in) W × 100 mm (3.94 in) H × 48 mm (1.89 in) D, 550 g (19.4 oz) without PW9002 180 mm (7.09 in) W × 100 mm (3.94 in) H × 67.2 mm (2.65 in) D, 830 g (29.3 oz) with PW9002 |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Hioki - PW3360-11 CLAMP ON POWER LOGGER number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Australia Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Resistance Meter
Temperature Hıtester
probe
Pin Type 4 Terminal Probe for 3540,3541,3555,3561
4-terminal probe
Equivalent Circuit Analysis Firmware
Multimeter
CURRENT PROBE
Flexible 600 A/6000 A AC Current Sensors in 3 Sizes
AC Flexible Current Sensor
Current Sensor
Multi-functional Receiving/Display Unit to Use Right on the Field or Output to Advanced Recorder or Logger
Ac/dc Auto Zero Current Sensor (100a Dc-5khz)
Current Probe
AC/DC Autozero Current Sensor
AC/DC CURRENT SENSOR
AC/DC CURRENT SENSOR
CURRENT SENSOR